What are the process characteristics of CNC machining center?
1. The market demand for certain products that are suitable for processing progressive composite production has changed and has been replaced. If it is replaced by a special production line, it will be a small loss. The processing power of general equipment is too low, the quality is not stable, and the quantity is difficult to guarantee. . After the trial cutting of parts in the replacement machining center, the program and related production information can be saved, and the next time the product is re-produced, it only takes a short preparation time to start production. How about cnc machining center?
2. Appropriate CNC machining centers are more effective. Some parts of high-grade workpieces have little demand, but they are key parts that require high precision and short construction period. The traditional process requires multiple machine tools to work harmoniously, the cycle is long, and the power is low. In the long process of processing, it is easy to produce waste products due to human influence, and then cause serious economic losses. , instead of the machining center for processing, the production is completely automatically controlled by the program, avoiding the long process flow, reducing hardware investment and human disturbance, and has the advantages of high production efficiency and stable quality.
3. Suitable for workpieces with suitable batch sizes
The flexibility of processing center production is not only reflected in the quick response to special requirements, but also the ability to quickly complete mass production and improve market competitiveness. The processing center is suitable for small and medium batch production, especially small batch production. When using the processing center, try to make the scale larger than the economic scale to achieve good economic results. With the continuous development of machining centers and accessories, the economic batches are getting smaller and smaller. For some messy parts, 5-10 pieces can be produced, and even a single piece of production can also be considered using a machining center.
4. Suitable for processing parts with messy shapes
The use of four-axis linkage and five-axis linkage machining centers and the sophisticated development of C[**]D / C[**]M technology have significantly improved the messiness of machined parts. The application of DNC makes the processing content of the same program satisfy various processing requirements, and makes the automatic processing of messy parts very easy.
5. other features
The machining centers of cnc machining center manufacturers are also suitable for processing multi-station and concentrated workpieces; it is difficult to measure workpieces. In addition, workpieces that are difficult to clamp or whose machining accuracy is completely guaranteed by alignment and positioning are not suitable for production on machining centers.
