1. Operators should wear tight-fitting work clothes with cuffs tightened; female comrades should wear protective caps; protective glasses should be worn when high-speed milling; masks should be worn when milling cast iron parts; gloves are strictly prohibited during operation to prevent hands from being caught in rotation Between the tool and the workpiece.
2. Before operation, check whether the components and safety devices of the milling machine are safe and reliable; check whether the electrical parts of the equipment are safe and reliable.
3. When loading and unloading the workpiece, the workbench should be retracted to a safe position. When using the wrench to tighten the workpiece, the force direction should avoid the milling cutter to prevent the wrench from hitting the tool or fixture when it is slipping.
4. When assembling and disassembling the milling cutter, use a special pad to pad it, and do not directly hold the milling cutter with your hands.
5. When milling irregular workpieces and using vises, indexing heads and special fixtures to hold the workpieces, the center of gravity of the irregular workpieces and the vise, indexing heads, special fixtures, etc. should be placed in the middle of the workbench as much as possible to avoid The workbench is not evenly stressed and deformed.
6. During rapid or automatic feed milling, do not move the worktable to the extremes to avoid squeezing the screw rod.
7. When the machine tool is running, it is not allowed to adjust, measure the workpiece and change the lubrication method, so as to prevent the hand from touching the tool and hurting the fingers.
8. Before the rotation of the milling cutter is completely stopped, it is not allowed to brake by hand.
9. Do not remove the chips by hand or blow with your mouth during milling to prevent the chips from damaging the skin and eyes.
10. During motorized rapid feed, the handle wheel clutch should be opened to prevent the hand wheel from rotating quickly and hurting people.
